11. Technical data
18
Nominal voltage range:
50 ... 3000 V AC/DC
Frequency:
0 ... 500 Hz
Input resistance:
1672 kΩ, therefrom 1540 kΩ in the moulded resistance cartridge
beneath the test electrode
Measurement current:
1.8 mA at 3000 V AC/DC
Display:
red LED for voltage > Limit Ut
green LED for standby / absent of voltage
360° LED light-stripe green / red
two-line LCD with backlight green / red for indication of voltage,
frequency, type of voltage, and battery condition
acoustic signal at > Limit Ut
Limit Ut:
The value of the response voltage Ut (change green / red)
is labelled on the name plate.
On-time:
1
5 minutes
Self-test:
function, protective resistors and ground contact
Surge voltage strength:
>100 kV (test report available)
Construction:
for indoor and outdoor installations
Indicator group:
I and III
Operating temperature:
–15°C … + 55°
Power supply:
6 x AA 1,5 V - IEC LR6 alkali-manganese or FR6 Lithium battery
Protection category:
IP 65, device can be used in moist environments
Design:
• two-pole voltage tester with fixed connection to ground
• 4-part GRP-telescopic tube with integrated PUR spiral line
• moulded resistor decade approx. 1540 kΩ
• display part made of impact-proof, dust proof
plastic casing IP 65 with unbreakable display cover
• 1.8 m line PUR with contact terminal or contact
magnet for grounding at rails
Standards
Display/function and test engineering in accordance with EN/IEC 61243-2
Extension and telescopic tube in accordance with EN/IEC 61010-1
Surge voltage strength in accordance with EN/IEC 60071
Dimensions / weight
1740 x 120 x 110 mm
run-out length up to 5.2 m
device incl. line and magnet 2.3 kg
Test electrode TT3 and
rubber bumper
10. Accessories
Spring clip for wall holder
Bag with ring bolt and shoulder belt
Replacement line with clamp.
Solid box
Replacement line with magnet
