TierTime UP600 User Manual Download Page 15

Page: 15 / 89

Make sure the nozzle is clean, plastic debris will add error to Nozzle Height.

5. Prepare UP300D for Printing

5.1Connectivity

UP300D supports USB and other networking communications. For Wi-Fi, and

Ethernet connection please refer to page 53-54, 66-68.

5.2 Auto Calibration

Auto Calibration can be triggered from the touchscreen, or from Wand software

when the printer is connected to a computer (refer to page 64). The calibration

process consists of leveling of the build plate,and measurement of nozzle height. For

more info please refer to page 25-30.

5.3 Auto Calibrationfrom Touchscreen

1. When the machine is switched on, user needs to first run the initialization in order

to operate the printer. Go to touchscreen press the initialize button.

2. Click Calibration.

3. AUTO. The printer will start the process of auto calibration.

Initialize Printer

2. Press “Calibrate”

3. Press “Auto”

4.When Leveling procedure

finishes, the touchscreen will

ask the user to confirm nozzle

height value.

5. Put the nozzle height detector

under the nozzle.Adjust the + and -

button to make the nozzle just

touching the sensor pad.

6. When the nozzle touch

the sensor it will emit a

buzz sound, press OK

button to save the value.

Summary of Contents for UP600


























































































Search results

Summary of Contents for UP600

Reviews:

Related manuals for UP600

Brands by name

Popular brands

TierTime UP600, User Manual

Search results

Summary of Contents for UP600

Reviews:

Related manuals for UP600

Brands by name

Popular brands