24
L o a d a n d p r i n t t h e
calibration model:
C : \ P r o g r a m F i l e s \ U P \
Example\Calibrate96.UP3
Calibration for the Correct Dimension
If prints are too big or too small or skewed, user could re-calibrate the printer to
print in correct dimension. The method is to print a calibration model, measure
its dimension and feedback to the software.
Measure the printed model
accroding the calibration
panel.
Input the measured values
into the software and finish
the calibration.
1
4
Open: 3D Print - Calibrate
This will open the calibration
panel.
2
H i t " R e s e t " b u t t o n t o
revert the value back to
default,make sure the upper
panel dispaly: XY:0.00 Deg/
XZ:0.00 Deg
3
