1\
Insert the filament from the spool into guiding tube, arrange the guiding tube as
shown in previous page. Press the Material button on the touch screen.
4\
Gently insert the filament into the
small hole on the print head. The filament
will be fed into the print head automatically
when it reaches the extruder gear inside
the print head.
5\
Check the nozzle for plastic extrusion.
If plastic is coming out from the nozzle, that
means the filament is loading correctly and
the printer is ready for printing. (The extru-
sion will stop automat- ically.)
6\
Finally insert the guiding the tube in
to the filament entrance and press the
tube into the holding clip on the print
head mount.
2\
Choose the printing material as ABS by press the Wheel button to switch between
different materials input the filament weight by using the
+/-
buttons.
3\
Click
"Extrude."
The print head will start to heat up, within 3 minutes. Its tempera-
ture will reach 260°C, then the printer will buzz and the print head will start to extrude.
Guiding Tube
Filament
Guiding Tube
Press the guiding tube
into the clamp
2\
3\
Prepare for Printing - Load Filament
Filament extrusion
17
499g
ABS
Extrude
STOP
Withdraw
499
34°C | 34°C
Information
Calibrate
Material
499
34°C | 34°C
Initialize
Config
