9
Assembly Instructions
STEP 3: Connect Brine Line to the Brine Tank
A. Remove brine well cap from brine well.
C. Remove nut from threaded end of brine well bracket. Slide
bracket (1) over top of brine well, lining up hole in bracket with
hole in brine tank as shown in Figure 1.1.
D. Insert threaded end of bracket into top hole (2) of brine tank.
Replace nut on bracket outside of hole in tank.
E.
Feed PVC tubing (3) from outside the brine tank through the
hole in the bracket. Push tubing firmly into quick connect fitting
on brine valve.
F. When fully inserted, secure tubing by placing blue “c” clamp (4)
from Parts Bag A in between collar of quick connect fitting and
brine valve.
G. Replace brine well cap.
Brine well bracket
Blue “C” clamp
Threaded Nut
FIGURE 1.1
B. Locate brine well bracket and blue “C” clamp in Parts Bag A.
Follow steps on next page to connect brine tubing to control valve.
