10
Assembly Instructions
A.
Slide brine nut over end of brine tube. Insert brine tube bushing/filter screen into the end of brine tube.
B. Insert brine tubing into brine line connector.
C. Tighten hexagonal nut onto brine line connector.
STEP 4: Connect Brine Line to the Control Valve
STEP 5: Connect backwash drain line to control valve
A. Slide drain hose connector into drain outlet.
B.
Insert drain line flow control into drain outlet.
C. Attach clear drain tubing to connector. Secure
using a hose clamp (from Owner’s Manual Zip-
lock Bag.)
D.
Secure the clear drain tubing over a floor drain
or other suitable drain. Leave an air gap of
about 1 1/2” between the end of the hose and
the drain. An air gap is necessary to prevent
backflow of sewer line.
Drain Outlet
Drain line
flow control
Clear drain tubing
Clip
Drain hose
connector
Note:
There is one 10’ length of clear drain tubing provided. This tubing will need to be cut to be used for both
backwash drain line from control valve and overflow drain line from brine tank. You should measure the length you
need for the backwash line from the resin tank first, using the remainder for the brine tank overflow line.
Air gap to drain
Brine tube
Brine Nut
Bushing/Filter Screen
Brine line connector
Brine line flow control
O-ring
Clip