Safety
When working with electricity, no instrument can guarantee complete safety.
It is the responsibility of the person who works with the instrument to op-
erate it in a safe way. Maximum security is achieved by selecting the proper
instruments and following safe working procedures. Safe working tips are
given below:
•
Always work according (local) regulations.
•
Work on installations with voltages higher than 25 V AC or 60 V DC should
only be performed by qualified personnel.
•
Avoid working alone.
•
Observe all indications on the Current Clamp TP-CC80 before connecting
any wiring
•
The Current Clamp TP-CC80 complies with class II, overvoltage CAT II - 600
V of the EN 61010-1 and EN 61010-2-032 standards. Do not clamp around
conductors with voltages equal to or exceeding 300 V DC or 240 Vrms AC.
•
To avoid physical injury, measurements on bare conductors or conductors
with damaged insulation are not allowed
•
Check the Current Clamp TP-CC80 and test leads for damages. Do
not
use
them if they are damaged
•
Take care when measuring at voltages higher than 25V AC or 60 V DC.
•
Do not operate the equipment in an explosive atmosphere or in the pres-
ence of flammable gases or fumes.
•
The Current Clamp TP-CC80 is designed for indoor use only
•
Do not use the Current Clamp TP-CC80 if it does not operate properly. Have
the equipment inspected by qualified service personal. If necessary, return
the Current Clamp TP-CC80 to TiePie engineering for service and repair to
ensure that safety features are maintained.
•
If the Current Clamp TP-CC80 is used in a manner not specified, the protec-
tion provided by the instrument may be impaired.
2
Current Clamp TP-CC80
