9
Connecting to the BIGFOOT
Before Using the BIGFOOT
DO NOT hook Personal Fall Arrest System (PFAS) to any point except a Fall Arrest or Fall Restraint
Anchor D-ring.
When making connections, only use double-locking snap hooks and double-locking carabiners with this equipment.
Only use connectors that are suitable to each application. Ensure all connections are compatible in size, shape
and strength. Do not use equipment that is not compatible. Ensure that all connectors are fully closed and locked.
Fall Arrest Tie-Off D-ring
The one fall arrest tie off D-ring is located on the lower center of the BIGFOOT. The user must insure that the lanyards
and harness are properly attached.
Fall Arrest
(One Worker Only)
Fall Restraint
(One Worker Only
on each side)
OSHA requires that before operating the system there must be an inspection for damaged equipment.
1 Check for loose, bent or damaged parts.
2 Check welded components for distortion, cracks, or other damage.
3 Check D-rings for distortion or damage replace if needed.
4 Check the slide handle for rusting and/or wear before each use.
5 All labels must be present and fully legible. (Copies of all labels are show on page 12)
6 Check for all pull pins that they are fully inserted and the safety cotter pin clips are
attached to each pull pin.
