4
TIE DOWN
Safety Products Division
800-241-1806 • 404-344-0000 • www.tiedown.com
E1847, Rev. 9/24/21
Recommended Surfaces:
✔
Thermoplastic Polyolefin (TPO) Membranes
✔
Polyisocyanurate (ISO)
✔
Expanded Polystyrene (EPS)
✔
EPDM Roofing Membranes
✔
Ballasted EPDM Membrane
✔
Metal Deck (20 ga. and 22 ga. ONLY)
✔
Plywood
Do Not Use on the Following Surfaces:
✖
Metal Deck less than 22 ga.
Or over 20 ga. (Structural Deck)
✖
Loose laid material not part of a complete
finished system.
✖
Ice
✖
Snow
✖
Tectum Deck
✖
Concrete
Applications: Surfaces
Roofing Load Requirements
Before the Penetrator X3 and cart are hoisted to any roofing deck the user MUST VERIFY THAT
THE DECK CAN ACCOMMODATE THE LOAD REQUIREMENTS.
Verify that the surface that the Penetrator X3 will be used on is capable of supporting both the unit and
personnel using it. Inspect that the entire area to determine if the working surfaces have the strength
and to support users safely.
CAPACITY:
The Penetrator X3 Mobile Fall Protection System is designed for a maximum of three persons
for fall arrest and two for fall restraint with a combined weight (clothing, tools) of no more than
310 lbs. per person. No more than four persons may be connected to the Penetrator X3 at any time.
IMPORTANT:
DO NOT start work for which fall protection is required until the Penetrator X3 and
corresponding FRS or PFAS have been completely installed. Do NOT disable any part of the FRS or
PFAS, including the Penetrator X3 unit, or reposition the unit, until work for which fall protection is
required has ceased.
