Preventative Maintenance Checklist (81000)
22
Zero-Gravity
®
Radiation Protection System Preventative Maintenance Checklist
Figure 14: ZGM-6-5H
Moving Parts Inspection (ZGHSA | ZGCM-HSA | ZGCM-48 |
ZGCM-66)
Rotational / Translational Motion Parts Replacement
1. The Zero-Gravity systems contain several components allowing for the
movement (rotational and translational motion) of other components.
2. As a result of long-term use, these components may require replacement after an
extended period of time to ensure the system functions as intended. Complete
inspection to determine if replacement of any of the components is required.
Rotational / Translational Motion Parts Inspection
1. While the system is not in use, move the balancer along the boom to inspect for
motion issues. The balancer should move freely with minimal interruption.
2. Reference the figures below for identification of applicable translational and
rotational components for your system.
(Figure 15: ZGCM-48 & ZGCM-66)
(Figure 16: ZGHSA) (Figure 17: ZGCM-HSA)
3. Rotate the boom arm about the drop tube to inspect for motion issues. The boom
arm should rotate freely with minimal interruption.
4. Move the system along the monorail to inspect for motion issues, if applicable.
The system should move freely with minimal interruption.
5. Unlock the boom and slide the boom back and forth to inspect for motion issues.
The boom should move freely with minimal interruption.
6. Contact a TIDI Products authorized representative or TIDI Products service for
repairs and / or replacement of components. Replacement and repairs may only
be completed by TIDI Products authorized personnel.
7. If additional support is needed, contact TIDI Technical Service using the provided
contact information.
