Step Six: Connecting To Power
(For Non-NMEA 2000 Vessels)
SmartSeal Systems which are connected to NMEA 2000 networks,
do not need to be separately connected to the power source as
the network is already connected and provides the necessary
operating power
Connect the Power Tee cable to a 12VDC Battery as shown below.
Make sure the + wire is fused.
DO NOT USE A VOLTAGE SOURCE
THAT IS NOT 12VDC +/- 3VDC AS IT
WILL DAMAGE THE SMARTSEAL SYSTEM
12V Battery
+
-
Fuse
Ignition
or Inline
Switch
NMEA 2000
Terminator
Male
NMEA
2000
Tee
Connector
NMEA
2000
Tee
Connector
NMEA
2000
Power
Tee
Drop Cable
To RMU
Drop Cable
To MCU
NMEA 2000
Terminator
Female
11
