Synergy Controller Application Note 4
August 2010, Revision - C
Tidal Engineering Corporation © 2010
Page 17 of 18
2. Create and Load the macro File.
Edit the macro file in Notepad or other plain text editor as shown below. Note that a
carriage return at the end of the final line is required.
Load the Macro file as described in the main body of this application note.
3. Test the Bar Codes.
When the following bar code is scanned, the controller will open and start PRODUCT1
profile:
When the following bar code is scanned, the controller will open and start PRODUCT2
profile:
A carriage return at the end of the final
line is required. Notepad shows the
text cursor below the final macro line
indicating the carriage on the final line.