Tico Pro-Spotter, Service Manual

Page: 195 / 211

PRO-SPOTTER HEATING AND AIR CONDITIONING
TICO Manufacturing
Service Manual 15-11
Figure 15-3: Air Conditioner Compressor
5. Install identification tags and disconnect electrical
connectors (4 and 5).
6. Loosen cap screws (8) and nuts (7).
7. Loosen belt (9).
8. Remove cap screws (6) and air conditioner
compressor (3).
9. Repair or replace components as necessary.
Inspection
1. Check all threaded components for damaged or
stripped threads. Repair light damage with thread
chasers. Replace parts found to be unserviceable.
2. Check condition of air conditioning system lines and
tubing. (See “R134a REFRIGERANT HOSES AND
TUBING” on page 15-4.)
3. Check components, lines, and fittings for signs of
leakage. (See “R134a REFRIGERANT LEAK TEST”
on page 15-5.)
Installation
Installation is the reverse of the removal procedure.
• If replacing with a new air conditioner compressor,
flush and purge each component in the air
conditioning system individually. (See “FLUSH AND
PURGE AIR CONDITIONING SYSTEM” on
page 15-9.)
• Evacuate the system. (See “Evacuate R134a
System” on page 15-7.)
• Recharge the system. (See “Recharge R134a
System” on page 15-8.)
3 Air Conditioner
Compressor 7 Nut (2 used)
4 Electrical Connector 8 Cap Screw (2 used)
5 Electrical Connector 9 Belt
6 Cap Screw (4 used) 10 Belt Tensioner
9
TPS-081
5
4
8
7
6
3
10