Tico Pro-Spotter, Service Manual

Page: 146 / 211

12-2 Service Manual
TICO Manufacturing
BOOM AND FIFTH WHEEL PRO-SPOTTER
INTRODUCTION
The purpose of the BOOM AND FIFTH WHEEL section
is to provide service and maintenance personnel with
guidance on the proper service procedures for boom and
fifth wheel systems on the TICO Pro-Spotter terminal
trucks.
The TICO Pro-Spotter terminal trucks have been
engineered for quick and efficient servicing while
minimizing downtime.
Service and maintenance personnel must inspect,
lubricate, and service the hydraulic boom and fifth wheel
systems regularly to maintain proper operation.
For additional information, please contact TICO factory
support. (See “CONTACT TICO SUPPORT” on
page 0-15.)
BOOM
Removal
See Figures 12-1 and 12-2.
1. Park and prepare tractor for service. (See “Park
Tractor Safely” on page 1-3.)
NOTE
The boom may be removed with the fifth wheel installed:
however, removing the fifth wheel will ease handling the
boom.
2. Remove fifth wheel top plate. (See “FIFTH WHEEL
TOP PLATE” on page 12-8.)
3. Remove boom grate and boom heat shield covers.
(See “GRATES AND COVERS” on page 14-5.)
Figure 12-1: Boom (exploded view)
4. Remove cap screws (1) and nuts (2) to allow removal
of boom cylinder pins (3).
1 Cap Screw (2 used) 4 Boom 16 Washer (as required) 19 Lock Plate
2 Nut (2 used) 14 Nut 17 Washer (2 used) 20 Boom Pin
3 Boom Cylinder Pin (2 used) 15 Washer (as required) 18 Bushing (4 used)
15
TPS-091
17
16
3
19
20
18
2
1
4
15
14
1
2
3
16
18