TickTalk twists Kids Wireless Bluetooth Headphones User Manual Download Page 14

 

Website

www.myticktalk.com

Toll Free

1-(844) 260-4051

FCC Warning:
This equipment has been tested and found to comply with the limits for

 

 a Class B digital device, pursuant to part 15 of the FCC Rules. These 
limits are designed to provide reasonable protection against harmful 
interference in a residential installation. This equipment generates, uses

 

 and can radiate radio frequency energy and, if not installed and used in

 

 accordance with the instructions, may cause harmful interference to 
radio communications. However, there is no guarantee that 
interference will not occur in a particular installation. If this equipment

 

 does cause harmful interference to radio or television reception, which

 

 can be determined by turning the equipment off and on, the user is 
encouraged to try to correct the interference by one or more of the 
following measures:
• Reorient or relocate the receiving antenna

.

• 

Inc

rease the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that 
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly 
approved by manufacturer could void your authority to operate this 
equipment.

This device complies with part 15 of the FCC Rules. Operation is 
subject to the following two conditions: (1) This device may not cause 
harmful interference, and (2) this device must accept any interference 
received, including interference that may cause undesired operation.

The device has been evaluated to meet general RF exposure
requirement.The device can be used in portable exposure 
condition without restriction.

Address

565 W Lambert Rd, Unit B,

Brea, CA 92821

Hours

9:00AM-6:00PM PST

Monday-Friday

Email

[email protected]

Summary of Contents for twists Kids Wireless Bluetooth Headphones















Reviews: