3
Adjusting the drawbar:
As soon as the golf bag has been attached to the TiCad
®
trol-
ley, you can adjust the drawbar to a comfortable height for you.
You can loosen the drawbar by turning the black handle coun-
ter-clockwise 3 to 4 times. only start moving the drawbar into
the right position once it has been completely freed and moves
without resistance. To fasten the drawbar, turn the black handle in
the opposite direction. When doing so, move the drawbar slight-
ly up and down to allow the fastening mechanism‘s teeth to fully
engage with one another and to prevent them from becoming
damaged.
Adjusting the drawbar
Connecting/removing the battery:
Place the battery inside the golf bag and then connect it to the
trolley. Before folding the trolley down, disconnect the battery
connector. Do not let the battery connector drop onto the ground.
To remove the battery, press down the locking spring and pull the
connector out horizontally
(do not pull on the cable)
.
Attaching the golf bag
Attaching the golf bag:
Put your golf bag onto the trolley before fitting the drawbar, i.e.
while it is hanging loose. To fasten the golf bag, insert one of the
round fasteners into the strap of the opposite fastening strap.
When doing so, make sure not to flick the fasteners, as this may
cause injury. To undo the fastening straps, hold on to the bottom
strap and then pull out the top fastening strap with your other
hand.
We recommend adjusting the drawbar and fitting the
handle only once the golf bag has been attached to prevent
the trolley from tipping over.
Inserting the handle:
Insert the handle in such a way that the locking pin on the bottom
engages.
Adjust the drawbar in such a way that the trolley is well-
balanced when pulled with the golf bag fitted in place.
1 Drawbar handle (removable)
2 Dual control buttons (concealed)
3 Flute head
4 Locking pin
1
2
3
4
1 Battery inside plastic housing
2 Cable
3 5-pin connector
1
2
3
