Plus 1.1 / 2.1 / 3.1
User Manual
Page
9 / 15
If you wish to place your speakers further apart than the supplied cable will reach,
we recommend that you purchase a heavier gauge of speaker cable to minimize
signal loss.
Follow the instructions on the ensuing pages to connect your audio sources to
speakers. The examples in the following pages are not meant to be exhaustive - just
examples. Connect the power cord from active speaker to the wall outlet.
2.5. Volume/Input Select Knob
The volume knob on the active speaker functions as an input select knob as well.
Push the knob to select an input source, it cycles through the following inputs
depending on what input source was last used. RCA, LINE-IN, OPT and
BLUETOOTH.
Press and hold volume knob for few seconds to switch Plus system ON of OFF.
Note:
The Plus speakers feature an auto standby function as this saves power
consumption. Auto Wake-Up Off: power consumption < 0.5 W Auto Wake-Up On:
power consumption < 3 W
