Tiandy 1.3MP Mini Bullet, User Manual

Page: 92 / 97

Chapter 6 Simple Fault Maintenance
6.1 System Failure
6.1.1 Not able to recognize U-disk or SD card
Possible Reason:
Disk partition information has problem, which cause no recognition, need
formatting for the disk;
Loose connection, re-plug U-disk/SD card and reboot the camera;
For portable disk, it may fail when there is not enough power, need to check the
power supply method to make sure enough power supply or change to use
independent power supply disk.
6.1.2 No recognition on Wireless Network Card
Possible Reason:
Static turn the network card into protection state, need to reboot the camera;
Unstable condition on the network card, need to replace for new network card.
6.2 Network Failure
6.2.1 Camera was power on but cannot be found on IP searcher
Troubleshooting steps:
Check status of computer/host NIC, NIC driver, network wire, and network
connection, make sure all are correct;
Directly connect the camera to computer/host server to check it works or not,
reset the computer/host server and try again;
Try another camera or another computer/host server;
Please contact us.
6.2.2 No image on IE
【
IE setting
】
It needs to download and install the ActiveX plug-in for IE browsing at first
connection