General faults and their solutions are shown in the following table:
Fault
Cause
Solution
Operation indicator does not
flash after the signal extender
is powered on.
1. The main power of signal
extender is abnormal.
2. The standby power of signal
extender is abnormal.
1. Reconnect the adapter.
2. Check the standby voltage
and reconnect it.
When running, the device
alarms successfully, and the
control panel does not display
the fire alarm.
Poor antenna contact.
Connect the antenna well.
IX. Maintenance.
1. Installation position of signal extender to avoid excessive humidity.
2. To ensure the long-term reliability and accuracy of the signal extender, the wireless
performance should be checked regularly.
3. The free warranty period of this signal extender is one year, with lifetime maintenance.
X. Notes
1. During the normal operation of the wireless system, avoid pressing the signal extender button
continuously, which will cause the signal extender to enter the non-working mode and affect the
wireless network.
Normal connection of.
XI. Random documents and warranty instructions
1. Packing documents: 1) Packing list: 1.
2) Instructions: 1 copy
2. Warranty instructions: Our company is responsible for the maintenance of this product. If any
problems are found, please contact our technical service department in time. Users are not allowed
to do so by themselves.
Disassemble or maintenance, otherwise, the consequences will be at your own risk.
3. Maintenance contact information is as follows:
Yingkou Tiancheng Fire Protection Equipment Co., Ltd.
Address: NO. 11-2 Kechechang Xili, Xishi District, Yingkou Pilot Free Trade Zone (Liaoning)
China
Fax: 0417-4835568
Postcode: 115004
Service Hotline: 400-6930-119
Email:
Website: www.tcfiretech.com