7
Ti-Research
Safety Instructions
For safe operation the following instructions are mandatory:
Intended Use
The usage of
Cast
by
Ti-Research
is intended for the production of castings
with the centrifugal casting principle by qualified users only. Any other
application is not intended use and not permitted.
Ti-Research
is not liable for damages resulting of not intended use. Not
intended use is any use not mentioned in this instruction manual.
All local regulations for safety at work and accident prevention are to be
obeyed for operation.
Electrical Safety
Prior to the connection it is to be verified that the local power supply, i. e.
voltage and frequency meets the technical specifications of the device.
The device may be connected to a power outlet with protection earth contact
and a leakage current safety switch with F
I
< 30mA only. Care has to be taken
for the power cord is not subject to mechanical tension.
For maintenance or repair purposes the device is to be disconnected from
power supply by pulling the power plug out of the socket.
Repair of the device is to be carried out by the manufacturer or persons
appointed by the manufacturer only.
Ti-Research
is not liable for damages resulting of improper work.
After repair-work on electrical parts of the device an insulation test and
protection earth inspection is to be carried out by a certified electrician.
Safe Operation
During operation heat sensitive parts have to be kept in a sufficient distance
from the device.
Combustible, inflamable and explosive substances are to be kept away from
the device during operation.
Do not touch hot parts, i. e. the crucible, crucible holder, top lid, mould, etc..
Handling of preheated moulds while inserting into or removing from the mould
holder may cause danger of burning. For the safe handling of moulds the
specially shaped mould pliers has to be used.