Thyracont VSR53D, Operating Instructions Manual

Page: 27 / 48

27
VSR-de-141106
2 Vacuum Transducer VSR
2.1 For Orientation
This operating instructions describe installation and operation of products with
article numbers
VSR53D, VSR53DL,
VSR54D and VSR54DL.
The article number can be found on the product's type label. Technical
modifications are reserved without prior notification.
2.2 Delivery Content
Included in the delivery consignment are:
- Transducer VSR
-
Protective flange cover
- Operating instructions
Available Accessories:
- Measurement cable 2m for VD9 display unit, W1506002
-
Measurement cable 6m for VD9 display unit, W1506006
- Measurement cable 2m for VD10/VD12 display unit, W1515002
-
Measurement cable 6m for VD10/VD12 display unit, W1515006
- Counterplug 15pole, XB1500002
2.3 Product Description
The VSR vacuum transducer is measuring total pressure in the range of
1200 - 1x10
-4
mbar. The transducer can be connected to Thyracont display and
control units or to customer related power supply and evaluation units in
compliance with pin assignment. The analog output signal 1.5V - 8.58V has a
logarithmic dependence on pressure over the whole range.
In addition the device has a serial RS485 interface for digital data transfer (see
chapter 4.2).
The transducer is equipped with a metal-sealed combination sensor type Piezo /
Pirani and temperature compensated. It can be mounted to suitable flange
connectors.