5
A
B
Daily (10 Hour) maintenance checks
Hydraulic oil level
• With oil cold, ensure rams are in correct position by lowered
bucket, turning steering to full left lock and if power swivel, turn
bucket into the straight ahead position.
• Level is correct when visible in sight gauge (Fig 3).
•
If no oil can be seen top up as required using approved hydraulic
oil to (HV46) through filler cap (Fig 4, A).
•
Do not overfill above sight gauge.
Check hydraulic oil filter indicator
•
Check hydraulic filter indicator.
•
If the RED button has ‘popped out’ (Fig. 4, B) the filter requires
changing.
CAUTION
It is imperative that hydraulic oil is clean to avoid damage to
hydraulic components.
Engine coolant level
• View level of coolant in expansion bottle
• The coolant level must always be between the MIN and
MAX marks (Fig 1).
• Top up at radiator cap if necessary (Fig 2).
WARNING - HOT FLUID
DO NOT
attmept to remove the radiator cap until system has
cooled down to avoid serious scalding.
Use the correct concentration of coolant. Machine initially filled
with water plus 50% antifreeze to BS.6580.
Check hydraulic filter indicator with the oil HOT. Filter indicator may
‘pop out’ in extremely cold temparatures and should be reset..
Fig. 1
Fig. 2
Fig. 3
Fig. 4
