THUNDERPOLE 01T-3000, Owner'S Manual

Page: 8 / 12

Frequency band selection / table
FREQUENCY BAND
ID CODE
COUNTRY SPECIFICATIONS
(Channels, Operating Modes, TX Power)
EU EU/FRANCE 40CH FM 4W / AM (E U )
CE CEPT 40CH FM 4W (EU)
U K U NITED KINGDOM 40CH FM UK + 40CH FM / AM EU (E U )
PL POLAND 40CH AM / FM 4W POLISH FREQUENCIES
I0 ITALY 4 0CH A M / FM 4W
I2 ITALY 3 4 CH AM / FM 4W
DE GERMANY 40CH AM/ FM 4W
IN GERMANY
Frequency Band Selection / Programming
Your Thunderpole T- 3 0 00 CB radio must be programmed and exclusively used on a frequency
band allowed in the country where it is used (see below). When the radio is switched ON, the
current programmed frequency band will be displayed on the LCD display ( 7 ). To program a
different frequency band, proceed as follows :
1) Turn O N the radio using the ON/OFF/VOL Control (1) .
2) Hold down the MODE / BAND Button (6) for approx 3 seconds to enter band selection mode.
3) Use the UP and Down buttons ( 9 + 10 ) or (17 + 19) on the microphone, to select the band.
4) Hold down the MODE / BAND Button (6) for approx 3 seconds to choose that band.
UK/E U Channel Selection (Frequency Band “U K ”)
If the UK Frequency band has been selected, all 80 channels available for UK use can be
accessed by short pressing the M ODE/BAND Button( 6 ) . This will switch between the 40 UK
FM channels , 40 EU FM and 40 EU AM (European) channels. It will change through the
channels as follows:
UK FM 40 Channels > EU FM 40 Channels > EU AM 40 Channels
Frequency Band Table
8 programmable frequency bands are available, as per the below table :
- 6 -
27 CH AM/ FM 4W