Thundercomm TurboX C6490, Quick Start Manual

Page: 4 / 8

Copyright© 2022 Thundercomm Technology Co., Ltd. All rights reserved.
Item Reference Description Item Reference Description
6 J3700
c)
LCD1 interface (option) 24 SW4402 Key, Volume down button
7 J1200 PCIe expansion module connector, 2 x 2-lane 25 SW4400 Key, Power on button
8 J3401 Camera interface #5 26

LED4406

LED4407

LED4411
3 x RGB LED from PMIC with independent brightness control:

LED4406, red LED

LED4407, green LED

LED4411, blue LED
9 J3400 Camera interface #4 18

LED4400

LED4402
LED4404
3 x RGB LED from GPIO:

LED4400, red LED

LED4402, green LED

LED4404, blue LED
10 J3300 Camera interface #2 27

J1100

J1101

J1102

J1103

Low-speed connector to low-speed expansion board

4 x 80-pin B2B connector
11 J3301 Camera interface #3 28
LED4401 LED4401, indicating Main Board power OK
LED4403 LED4403, indicating SOM power input OK
12 J3200 Camera interface #0 29 J3500
90-pin B2B connector, for camera interface expansion such as
HDMI in function and so on (with HDMI in)
13 J3201 Camera interface #1 30 J3600 LCD0 interface
14
LED4408
d)
LED4408, Flash LED #3
31 J5000
90-pin B2B connector, for display interface expansion such as
LVDs, 4k LCM
LED4409 LED4409, Flash LED #2
LED4410 LED4410, Flash LED #1
15 SIM4201 Nano SIM card slot #2 40

SW1300

SW1301

SW2100

SW2101

SW2200
DIP switches for board function control
a)
Only HS 2.0 signal is available on C6490 SOM.
b)
C6490 USB0 is a complete Type-C port. By default, USB3900 is not used.
c)
C6490 has only one group of DSI0, and thus all LCD1 interfaces are unavailable.
d)
Unavailable on C6490.