INSTALLATION
12
2. Installation
This section describes how to install the ARC-8050T2 Thunderbolt 2
RAID storage with host computer and disks.
2.1 Before You First Installing
Thanks for purchasing the ARC-8050T2 as your RAID data storage.
The following manual gives simple step-by-step instructions for
installing and configuring the ARC-8050T2 RAID storage.
Unpack
Unpack and install the hardware in a static-free environment.
ARC-8050T2 RAID storage is packed inside an anti-static bag
between two sponge sheets. Remove it and inspect it for dam-
age. If the ARC-8050T2
RAID storage appears damaged, or if any
items of the contents listed below are missing or damaged, please
contact your dealer or distributor immediately.
Checklist
• 1 x ARC-8050T2 8-bays RAID storage unit
• 1 x Installation CD – containing driver, relative software, an
electronic version of this manual and other related manual
• 1 x RJ-45 LAN cable
• 1 x Power cord
• 32 x Drive mounting screws (4 per drive tray)
• 1 x Quick start guide
System Requirements
• Computer with Thunderbolt connector
• Thunderbolt cable
• Mac OS X 10.8.5 or higher
• Windows 7&8
“For Windows PC: the Thunderbolt certified device driver must be
installed before plugging in the device for it to function properly”
