background image

16

Can i charge the Weekender using solar panels? 

 

Yes, you can use solar to charge the battery (once the panel output  
has been regulated) via the 50 Amp Anderson plug connection (10).  
Ensure the master switch (4) is in the ON position. 

Can i charge the Weekender using a dC-dC charger?

 

Yes, just like solar charging the Weekender can accept a 12 Volt charge input 
from a DC-DC charger. This can be achieved by connecting the DC-DC charger 
outputs to the Weekender’s 50 Amp Anderson plug connection, and ensuring  
the master switch (4) is turned ON.

When i charge my battery in the Weekender, the led display does not show 
a current output?

 

The LED display will only show output current that is being drawn from your 
battery as it discharges.  

the red led is displayed when i turn the Weekender 240 Volt inverter. 

If the red LED display is active when the 240 Volt inverter control switch has  
been turned on and a 240 Volt appliance is connected, the appliance may have a 
power demand that is too high for the inverter.

faq’s and trouble shooting

Frequently Asked Questions & Trouble Shooting

Summary of Contents for WEEKENDER

















Reviews: