5
CABLE INDICATOR INSTRUCTIONS
Green
light on
This means the connection is correct and the circuit
is working. You can turn on the engine to jump start
your vehicle.
Red light on
with buzzing
noise
This means the connection is wrong. The buzzing
noise is to alert you to adjust the clamps. Place
clamps in the correct position as shown in step 2.
Wait until the green light turns on before turning on
the engine.
Green light
blinking
with buzzing
noise
This means the vehicle battery is low. Press the
‘boost’ button and wait till the green light stops
blinking and becomes solid. Ensure you turn the
engine on within 30 seconds when the green light
is solid.
No lights
on and no
buzzing
noise
This means the vehicle battery may be damaged.
Once you have confirmed the clamp connection is
correct, press the ‘boost’ button and wait for the
green light to turn on. Ensure you turn on the engine
within 30 seconds.
Beep Beep
Beep Beep
Beep Beep
Beep Beep
Beep Beep
Beep Beep
Beep Beep
Beep Beep
INCLUDED IN THE BOX
CHARGING INSTRUCTIONS
JUMP STARTING INSTRUCTIONS
Jump Starting 12V Vehicles
1. Connect the blue plug fully seated into the host, and make
sure the cable indicator is off.
2. Connect the red clamp to the positive (+) battery terminal,
and the black clamp to the negative (-) battery terminal.
3. Follow the instructions of the cable indicator as below.
4. Start the vehicle.
5. When the vehicle has been jump started, remove the jumper cable from the vehicle
and leave the engine running.
BOOST
reverse
correct
BOOST
reverse
correct
