THUNDER TIGER Vocans, Instruction Manual, Page: 18 / 28

13
Radio Installation I
1. First cut two sail control lines .
Main Sail Control Line 25”(65cm)
Jib Sail Control Line 30”(75cm)
2. Thread the control lines through
front and rear winch line guides then
try to reach the line inside the hull.
Temporally secure the two ends on
the deck and servo tray with tape to
prevent the line loosened.
3. Refer to servo manual and install
the servo mounting hardware then
secure the servos in place. Note
the servo orientation.
4. Install the switch in place.
5. Connect the radio system
33
33