THUNDER TIGER RAPTOR 30, Assembly And Maintenance Manual

Page: 17 / 50

(7) BK0086
(6) BK0092
(3) HML2
(4) BK0075
(2) HMF2-8N
(4) BK0075
(3) HML2
(1) HSE2612N
(1) HSE2612N
(2) HMF2-8N
(4) BK0075
Pitch Servo
Throttle Servo
(3) HML2
(2) HMF2-8N
(7) BK0086
(5) BK0094
(1) HSE2612N
75mm
15
17 Servo Installation-Part2
Mount the Steel Link
Ball at 10.5mm(approx
7/16") from the center
of the servo horn.
51mm
(1) HSE2612N Self Tapping Screw(M2.6x12).... 8
(2) HMF2-8N Screw(M2x8)................................ 3
(3) HML2 Hex Nut(M2)...................................... 3
(4) BK0075 Linkage Ball.................................... 3
(5) BK0094 Linkage Rod .................................. 1
(6) BK0092 Linkage Rod .................................. 1
(7) BK0086 Ball Link.......................................... 4
Assembly Tip: Remove all the servo wheels prior to attaching the steel linkage
balls. Make sure all linkages are the correct length.
On/Off Switch
Gyro Amplifier
Receiver
Battery Pack
(2) BK0106
(1) BE1052
Thunder Tiger TG-8000 piezo
gyro is recommended
(2) BK0106
(2) BK0106
(2) BK0106
On/Off Switch Face Plate
18 Receiver/Gyro Installation
(1) BE1052 Antenna Tube................... 1
(2) BK0106 Double Sided Tape.......... 2
Thunder Tiger recognizes that there are many brands of radios and gyros to choose from. You are encouraged to
seek the advice of experienced helicopter pilots when making this decision. We do recommend the use of the Thunder
Tiger TG-8000 piezo Gyro since it was designed expressly for this machine.