8
a
SHOCK AND REAR TOE-IN ADJUSTMENT
b
a.
Use the included shock clips to adjust for spring pre-load. Pressing the entire car down, release,
and the car should return to ride height (indicated on set-up page). More pre-load clips will produce
higher ride height, and less clips will produce lower ride height. Amount of clips used for front and
rear shocks can be different, but clips should be the same for left and right.
b.
Use the included plastic toe-in plates to adjust for rear toe-in. The toe-in angles are indicated on
each plates.
WARNING
Thank you for purchasing a Thunder Tiger Product. Please read all instructions thoroughly before operation.
1. This product is not a toy. It is a high performance model product. It is important to familiarize yourself with
the model, its manual, and its construction before assembly or operation.
2. Do not operate model products in rain, on public roads, near crowds, near airport, or near areas with restricted
radio operation.
3. Always keep fuel away from heat and open flame. Only operate in open, well-ventilated area. Store fuel in
cool, dry area. Keep the fuel bottle cap tightly closed. Clean up any leak or excess fuel before starting the
engine.
4. This product, its parts, and its construction tools can be harmful to your health. Always exercise extreme
caution when assembling and/or operating this product. Do not touch any part of model which rotates.
5. Check your radio frequency with the proper operating frequency of the area or country. Always check to see
if there are any modelers operating on the same frequency as your are. Also, check your radio for proper
operation before operating a mode.
6. Improper operations may cause personal and/or property damage. Thunder Tiger and its distributor have no
control over damage resulting from shipping, improper construction, or improper usage.
7. Thunder Tiger assumes and accepts no responsibility for personal and/or property damages resulting from
the use of improper building materials, equipment and operations. By the act of assembling or operating this
product, the user accepts all resulting liability. If the buyer is not prepared to accept this liability, then he/she
should return this kit in new, unassembled, and unused condition to the place of purchase.
16
