CHARGER CONNECTION STEPS
Remove the fuse. Keep it in a safe place.
Connect the charger to the AC power source.
Connect the charging cables and balance board to the charger as shown.
Connect Red Cable to Red Jack on the Seawolf.
Connect BLACK Cable to BLACK Jack on the Seawolf.
Connect the balance cable of the battery to the balance board.
The charger should begin to charge the battery. When charge is done, disconnect the cables in reverse order.
Tight the front panel screws diagonally in order to seal the hull properly with even pressure. The front O ring
should appear uniformly flattened against the cap or the electronics!).
09
CHARGER CONNECTION
BLACK
RED
BLACK
RED
CAUTION! Always: BLACK cable to the BLACK port, RED cable to RED port.
CUSTOMER SERVICE
Distributed by / Vertrieb :
THUNDER TIGER EUROPE GmbH,
Rudolf-Diesel-Str. 1, 86453 Dasing, Germany
For customer service please contact
[email protected]
Germany, Netherlands, Belgium,
Luxembourg, Austria, Italy
■
Distributed by :
Thunder Tiger Corporation
No.7 6th Road, Industry Park,
Taichung, Taiwan 40755
For customer service please contact
[email protected]
Tel : 886-4-23591632
For Other Countries
■
Summary of Contents for 5222-F
Page 19: ...18...