02
ASSEMBLY PROCEDURE
1. Assembly of the horizontal tails
Take of the horizontal tails and the
connection rod for the horizontal tails,
please install them to the assembling
groove at the tail parts of fuselage as
per the right position, then lock the
horizontal tails by screws.
2. Assembly of the main wings
Take of the Main wings & Aileron servo
Y harness & Connection rod for the
main wings & Screws. Firstly, please
insert the connecting rod into right and
left main wings and connect them
together. Then please connect aileron
servo with Receiver by the Y harness.
Finally, please put the assembled main
wings to the right position on the back
of fuselage and lock them by the
screws. Please make sure there is no
gap or shaking.
3. Close the canopy and then the assem-
bly of "Explorer 1500" is finished.
