Thunder Heart Performance Corp.
615-672-8811
www.thunder-heart.com
8
EI4250
Note: The “horn” and “auxiliary power” circuits are found on both the front and rear
harness connectors to allow for different mounting locations. Use the most
convenient one for the horn. Both “auxiliary power” circuits may be used as
needed.
4.
When all the wires are routed and the harnesses are temporarily
attached at their mounting points, cut the excess length from the ends of
the wires, leaving them approximately 3” too long for final fitment.
2.3
H-D 1996-2003 Hand Control Connections
Starting in 1996, Harley spliced the power wires of both the left turn signal
and the horn, and the right signal and the brake switches together.
Figure 13—H-D 1996-2003 Hand Control Harness
Figure 14—H-D 1996-2003 Hand Control Wire Splice
When using these hand controls, you have two options:
x
Use the existing H-D harness with splice in place, and not use the
“left turn signal switch power” and “right turn signal switch power”