OPERATING INSTRUCTIONS.
1.
The door of the room must be closed for greater efficiency.
2.
Plug in the heater.
3.
Switch on the heater with the rotary selector by selecting the desired function.
4.
Can turn on only one tube, 2 tubes or 3 tubes.
5.
Avoid lighting all 3 tubes at the same time, turn them on one by one if possible.
6.
Each tube on adds 400W.
7.
One tube lit 400W, 2 tubes lit 800W and 3 tubes lit 1200W.
8.
If you turn the selector to the left side, the oscillating function is activated.
9.
To turn off the heater, turn the selector to the OFF position.
10.
Avoid turning off all 3 tubes at the same time, turn them off one by one if possible.
IMPORTANT SECURITY INSTRUCTIONS.
-
Never leave the heater unattended while it is plugged in and switched on.
-
While it is in operation, never cover it. It can cause fires.
-
Always unplug the power when it is not in use.
-
If you leave the heater for a moment do not leave it on, turn it off.
CLEANING AND MAINTENANCE.
-
The heater must be unplugged from the electrical power and cool before proceeding
to its cleaning.
-
Clean the device with a slightly moistened cloth.
-
Never use abrasive or flammable products to clean the appliance.
-
Never immerse the heater in water.
-
Clean the grids with a duster, brush or vacuum cleaner.
-
If you are not going to use your heater for a long period of time,
store it in a cool, dry place where it does not pick up dirt or dust.
SPECIFICATIONS.
- Input Power: 220V- 240V / 50 - 60 Hz.
-
3 Heating powers: 400W / 800W / 1200W.
-
Swing function.
-
Anti-tilt safety system.
