•
0-9: the number keys are used for setting unit price data.
•
DECIMAL POINT: is used for setting the decimal position of unit price.
2. DISPLAY DESCRIPTION
Display indicators
•
Tare indicator: The tare led is located on the left side below the weight window.
•
Zero indicator: The zero led is located on the right side below the weight window.
•
AC power indicator: Ac power led is located below the total price window.
OPERATION
1. GENERAL INSTRUCTION
•
When battery goes low, it is the time to charge the battery with the power line.
•
Before starting, please check if the scale is in the smooth level, if not, please make adjustment.
BASIC OPERATION
1. ZERO THE SCALE
When there is nothing on the scale but reading is not zero, press the ZERO key to turn on the zero indicator.
2. WEIGHING
Ensure that scale is in zero position and zero indicator is plowing, place an item for weighing on the pan,
the weight of the item will be showed on the weight window.
3. TARE
Put container on the platter, once the weight reading is stable, press the TARE key, the tare indicator will
be on and the containers weight will be deducted. When it is time to clear the tare, take off the container,
and press tare key again.
4. OVERLOAD WARNING
Please do not add item that is over the maximum capacity, when the scale is ringing an alarm, remove the
item on the platter to avoid damage to the load cell.
5. UNIT PRICE SETTING
To trade with the scale, it is necessary to setting a unit price of the goods, then use this unit price to
determine how much value of the goods which placed on the platter.
When scale displaying the weight of the goods placed on the scale, set the unit price through numeric
keys, set unit price is showed in unit price window display, total price window display shows the total
price of the goods. To cancel the previous unit price, press C key.
