If it is selected LOW, the unit will work under LOW NATURE wind mode.
SWING: Press once this button to make horizontal swing of vertical louvers, the SWING
indicator will be displayed. Press again for fixed air direction. To directing vertical
airflow, adjust the horizontal louvers manually.
COOL: Press once this button to start the evaporative cooling function. Press again this
button to cancel.
IONIZER: Press once this button to release negative ions into the air, to freshen the air
and care health. Press again this button to cancel.
HUMIDIFIER: During operation, press this button to humidify the air, improve the air
damp, avoid skin dry and spall. Press again this button to cancel.
TIMER: It can be set between 24 hours, increased by 1 hour intervals.
MAINTENANCE AND CLEANING
Note: After long time operation, the filtration mesh becomes clogged with dust and
dirt, which will greatly affect the unit’s performance. It is recommended to clean the
filtration mesh frequently.
Cleaning the filtration mesh
1.
Remove plug from wall outlet.
2.
Catch the filtration mesh handle and pull upwards.(shown as fig.4)
3.
Clean filtration mesh with mild detergent and soft brush.
4.
Make sure filtration mesh is completely dry before installing.
Cleaning the water tank
1.
Remove plug from wall outlet.
2.
Pull out the water tank.(shown as fig.5)
3.
Clean the water tank with a little mild detergent on a towel and then rinse in
water.
4.
Put the water tank in place after cleaning.
Cleaning the body
Clean the body with a little mild detergent on a soft cloth.
Note:
Unplug from outlet before cleaning.
No water on the control panel.
