Thuli Tables 300 Stationary, Owner'S Manual, Page: 5 / 19

5 Table Assembly
1. Lay the table onto its cushions.
2. Remove the hitch pins and “O” rings from the ankle rest extension rods.
3. Loosen both locking knobs and slowly remove the wooden dowels from the
plastic housing (these dowels were installed for shipping purposes to keep
the spacer from falling out of the housing).
4. Insert the ankle rest extension rods through the frame and housings.
5. Replace the “O” rings and hitch pins.
ANKLE REST ATTACHMENT
TABLE LEGS ATTACHMENT
Attach the front and back leg sets to the table
frame by matching up the colored dots and using
the 12 sets of fasteners provided. Insert the bolt
(first through the frame and then through the
leg). Slide on the washer, lockwasher and nut and
tighten down.
STRETCHER ATTACHMENT
Attach the long stretcher to the front and back
leg sets using the four remaining lag bolts.
Engage the short end of the allen wrench firmly
into the recess of the bolt to avoid stripping it out
when tightening.
Your table is easy to assemble. For protection during shipping, the headpiece, ankle rest extension and legs are packaged
separately from the table. We have included two different wrenches to assist you in the assembly process.
Paper Hold-Down Wire