• Line up one foot base (M), cross support brace (L) and structure bottom leg (K)
as shown in the diagram.
Please note that there is a right and left structure bottom leg (K). The structure
bottom leg should be positioned so that the single screw hole thirteen inches
above the ground is facing forward and the flat surface at the top connection
faces outward to the side.
• The curved foot base (M) should be positioned so it curves outward as shown.
The longer straight section should be facing forward so it will support the
weight of the bikes.
• Thread the two longer hex head screws (G) through the washers (H) and then
through the foot base, structure bottom leg and into the cross-support brace
in that order. Tighten firmly.
Repeat for the other side. Screw the other side into the same structure
cross-support brace (L).
INSTALLATION /
INSTALLATION
/
INSTALACIÓN
1a
K
L
M
G
H
L
M
K
