3/11
PLAYSTATION®3
INSTALLATION ON PLAYSTATION®3
1.
Set the wheel’s USB selector
(7)
to the “PS3” position.
2.
Connect the USB connector
(13)
to a USB port on your console.
3.
Turn on your console.
4.
Launch the game.
You are now ready to play!
USING THE “HOME” BUTTON (6)
Your wheel’s “Home” button allows you to exit games and access your PlayStation®3 system’s menus.
IMPORTANT NOTES ON PLAYSTATION®3
- The wheel’s USB selector
(7)
must always be set to the “PS3” position before connecting your wheel.
- In “1 Player” mode: If your official gamepad is turned on, you will have to switch it to “controller port 2” in
order for your wheel to be functional.
- On PlayStation®3, the wheel is only compatible with PlayStation®3 games (and will not function with
PlayStation® 2 games).
- In certain racing games, do not hesitate to test out your wheel’s 2 sensitivity modes in order to optimize
its precision and responsiveness.
"Gran Turismo® PS3™" configuration procedure for the "Ferrari Racing Wheel: Red Legend
edition" racing wheel
By default in this game, acceleration and braking are not assigned to the "R2/L2" buttons and switching
gears is not assigned to the "R1/L1" buttons
(which is the case for the pedals and Up/Down levers on the
"Ferrari Racing Wheel: Red Legend edition" racing wheel).
Procedure to configure and optimize the wheel:
(This procedure only needs to be carried out once, as the changes will then be saved in the game)
1)
Start up your game.
2)
Go to the
OPTION
menu.
3)
Go to the
CONTROLLER SETUP
menu
(by clicking the symbol representing the gamepad and the D-Pad).
4)
Configure your controller as follows:
•
Accelerate
on
R2
•
Brake
on
L2
•
Shift Up
on
R1
•
Shift Down
on
L1
•
Rear View
on
L3
and/or
R3
•
Left & Right View
on
D-Pad Left & Right
Summary of Contents for Ferrari Racing Wheel Red Legend Edition
Page 1: ......
