STEP ONE
Start with 1 Leg and 1 Modesty panel.
Align the pre-drilled holes with the appropriate hardware holes.
Tighten the pre-installed VB Connector onto the VB Pin, turn clockwise.
Use 2 UroScrews to fasten the 90° L Brackets into the pre-drilled holes.
Repeat Steps One and Two for the second Modesty Panel and attach
the second leg
Without the weight of the Top/ Surface, check to see the level status.
If the bases are not level, you can access the Levelers through the Base
Access Door. Turn the adjustable Levelers till it is level on all corners.
STEP TWO
STEP THREE
STEP FOUR
D
A
