Thrane&Thrane TT-6222A VHF DSC User Manual Download Page 4 | Manualshive

Page: 4 / 90

background image

Disclaimer

Any responsibility or liability for loss or damage in connection with the use of this
product and the accompanying documentation is disclaimed by Thrane & Thrane. The
information in this manual is provided for information purposes only, is subject to
change without notice and may contain errors or inaccuracies.

Manuals issued by Thrane & Thrane are periodically revised and updated. Anyone
relying on this information should acquire the most current version e.g. from

thrane.com

or from the distributor

.

Thrane & Thrane is not responsible for the content or accuracy of any translations or
reproductions, in whole or in part, of this manual from any other source.

Copyright

© 2012 Thrane & Thrane A/S. All rights reserved.

Trademark Acknowledgements

•

Thrane & Thrane

is a registered trademark of Thrane & Thrane A/S in the European

Union and the United States.

•

Other product and company names mentioned in this manual may be trademarks or
trade names of their respective owners.

GPL notification

The software included in this product contains copyrighted software that is licensed
under the GPL/LGPL. The verbatim licenses can be found online at:

http://www.gnu.org/licenses/old-licenses/gpl-2.0.html

http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html

You may obtain the complete corresponding source code from us for a period of three
years after our last shipment of this product, which will be no earlier than December 31,
2015, by sending a money order or check for DKK 50 to:

SW Technology/GPL Compliance,
Thrane & Thrane A/S,
Lundtoftegaardsvej 93D
2800 Lyngby
DENMARK

Please write "source for product TT-6222A VHF DSC" in the memo line of your payment.

You may also find a copy of the source at http://www.thrane.com/foss.

«
...
2
3
4
5
6
...
»

Summary of Contents for TT-6222A VHF DSC



























































































Reviews:

No comments

Related manuals for TT-6222A VHF DSC

SHELFORD II SEL-DAB-CRM-2 UK

Brand: MAJORITY Pages: 24

Brand: Palsonic Pages: 5

Brand: Radio Shack Pages: 2

Brand: SimonsVoss Pages: 16

Brand: Albrecht Pages: 16

Brand: Cobra Pages: 43

Belle Epoque 1906 DAB

Brand: auna Pages: 44

Brand: Philips Pages: 16

Brand: Philips Pages: 25

PhotoFrame 9FF2

Brand: Philips Pages: 86

Brand: Sony Pages: 2

ICF-C7IP Marketing

Brand: Sony Pages: 5

Brand: Naxa Pages: 14

Brand: Sony Pages: 2

Brand: Sony Pages: 19

Brand: Medion Pages: 23

Brand: RCA Pages: 1

Brand: Elta Pages: 52

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands