MARINE SSAS
4
GPSDK/T
T SSAS C
onfi
g
. 1A-300904
2. PREREQUISITES
The confi guration of the TT-3000SSA requires that the unit is switched on and that a Laptop/PC is connected to the
TT-3000SSA through a serial connection.
Communication is possible via a Terminal Program - i.e. easyMail (T&T), HyperTerminal (Windows), MiniCom (Unix) etc.
The communication parameter must be 4800 baud, 8 data bits, no parity and 1 stop bit.
An illustration of the communication set-up is showed below:
* CHECK:
Verify that the terminal program is running and connected:
•
Connect the PC/Laptop to the TT-3000SSA via the TT-3616B
Interconnection box’s serial port.
•
Start the Terminal Program
•
Power on the TT-3000SSA. A boot message appears (example):
Thrane & Thrane (c), Inmarsat-C Transceiver, TT-3026M (51524)
Start-up: Tue Jul 13 14:14:25 2004
The above shows that the Terminal Program is connected and that the TT-3000SSA is powered on.
In the following every command is to be entered STRICTLY followed with ENTER.
* Check:
shows how to check and verify the setting you just entered.
Now follow the steps in section 3-5 to confi gure the TT-3000SSA for use with LocPoint Marine SSAS!
