Thrane&Thrane TT-3000LRIT mini-C, Installation Manual, Page: 20 / 35

TT-3000LRIT mini-C Installation Manual
5. To verify that the terminal is operational, measure the voltage
between the Black/Violet wire (3V3 out) and White wire
(GND). The voltage should be 3.3Volts. If not, the terminal is
not operational.
6. Cut off or terminate all other wires to avoid any short
circuiting.
4 R
EGISTRATION
Before use of the TT-3000LRIT system on the Inmarsat-C system, it
must be registered with Inmarsat. This involves a little paper work and
is done using the SARF (Service Activation Registration Form)
supplied with the TT-3000LRIT.
The SARF for registration of Maritime MES can also be found on
www.inmarsat.org (CUSTOMER SUPPORT -> SERVICE
ACTIVATION). The site also contains notes on how to complete the
maritime form.
The TT-3000LRIT includes a registration form for Maritime Mobile
Earth Stations. The Service Activation Registration Form contains
different abbreviations that will be explained here.
20