manualshive.com logo in svg

Thrane&Thrane Sailor SP3560, User Manual

Share
Download
Thrane&Thrane Sailor SP3560 User Manual Download Page 3

0850

IMPORTANT INFORMATION

Safe use of ATEX equipment:

• 

Do not change the battery in wet or humid environments.

• 

Always keep battery connectors dry and clean.

• 

Use only with Sailor ATEX approved accessories. 

 

Alternatively ATEX approved accessories in compliance 
with the accessory connector ATEX specification may be 
used.

• 

Do not change accessories in wet or humid enviroments.

• 

Do not charge the battery in hazardous area.

• 

For charge of battery use 

 

Part no: 403505A - ATEX CH3505 Compact Charger, 

 

Part no: 403507B - ATEX CH3507 Single Position Charger or 

 

Part no: 403508B - ATEX CH3508 Dual Position Charger

• 

Use only battery type Sailor B3503 or B3504.

• 

Do not use a mechanically damaged radio.

• 

Unpacking of the radio and accessories and the removal of 
the protective film in front of the display window must not 
take place in the ATEX protected area.

99-127722-B

Summary of Contents for Sailor SP3560































































Reviews:

No comments

Brands by name

Popular brands

Load more brands