Chapter 2: Using the Alarm Panel
10
General functions
General functions
Buttons in front panel
Apart from the Distress button(s) described in
Sending a Distress alert
on
page 7, the front panel has four other buttons: Test, Mute,
and
.
Testing the Alarm Panel
To test the light and sound indicators in the Alarm Panel, do as follows:
1. Press and hold the
Test
button.
Verify that all light indicators and alarm buttons are flashing.
2. While holding the
Test
button, press any other button, including the
Distress button.
The buzzer sounds to indicate that the pressed button and the buzzer is
working.
Muting the alarm sound
To mute the alarm sound while it is on, press the
Mute
button.
Note
This test only verifies the function of the Alarm Panel itself, not of
any connected equipment or the total system. For information on
how to test the system, refer to the manual for the individual system
(Inmarsat C, VHF or MF/HF).
Note
Alarm sounds are muted on all connected units until they are
activated by a new event.
Summary of Contents for SAILOR 6101
Page 1: ...INSTALLATION AND USER MANUAL SAILOR 6101 and SAILOR 6103 Alarm Panel ...
Page 7: ...Table of Contents vi App A Specifications General specifications 31 Glossary 33 Index 35 ...
Page 11: ...Chapter 1 Introduction 4 The Alarm Panel ...
Page 19: ...Chapter 2 Using the Alarm Panel 12 General functions ...
