Hedges 48” Round Dining Table
ASSEMBLY INSTRUCTIONS
PARTS REQUIRED
To Assemble:
Extra:
A.
Table Top – 1 pc.
B.
Assembled Table Base – 1 pc.
HARDWARE INCLUDED: Hardware in “To Assemble” column is required to complete installation.
Hardware in the “Extra” column is in case you misplace or lose assembly hardware
C.
Nut – 4 pcs.
D.
Flat Washer – 4 pcs.
E.
Lock Washer – 4 pcs.
F.
Headless Bolt – 4 pcs.
G.
Nut – 1 pcs.
H.
Flat Washer – 1 pcs.
I.
Lock Washer – 1 pcs.
J.
Headless Bolt – 1 pcs.
ASSEMBLY INSTRUCTIONS
1.
Invert the table top and place on a padded, non-abrasive surface.
2.
Screw the four headless bolts (F) into the four holes on the underside of the table top, with the
slotted end of the bolts facing upward. Tighten using a flat-head screwdriver.
3.
Turn the assembled table base (see separate assembly instructions for base) upside down
and place the base on top of the table top bottom, inserting the table base holes into the
bolts protruding from the top. See illustration below.
4.
Place a flat washer (D), lock washer (E), and a nut (C) on each bolt, as illustrated. Hand-
tighten only.
5.
Tighten nuts securing base legs to stretchers first, then tighten nuts securing top to base. Do
not over-tighten. Do not use electric drill. Hand-tighten only.
6.
You are now ready to use your Dining Table. Enjoy.
Do not use electric drill to tighten hardware
