6
THORSEN Intelli-Fast Battery Charger
2. Attach at least a 24-inch long 6-gauge (AWG) insulated battery cable to
the NEGATIVE (NEG, N, -) battery post.
3. Connect the POSITIVE (RED) charger clip to the POSITIVE (POS, P, +) post
of the battery.
4. Position yourself and the free end of the cable you previously attached to
the NEGATIVE (NEG, N, -) battery post as far away from the battery as
possible – then connect the NEGATIVE (BLACK) charger clip to the free end
of the cable.
5. Do not face the battery when making the
fi
nal connection.
6. When disconnecting the charger, always do so in the reverse order of the
connecting procedure and break the
fi
rst connection while as far away from
the battery as practical.
7. A marine (boat) battery must be removed and charged on shore. To charge it
onboard requires equipment specially designed for marine use.
BATTERY CHARGING — AC CONNECTIONS:
• This battery charger is for use on a nominal 120-volt circuit.
•
DANGER – Never alter AC cord or plug provided – if it does not
fi
t the
outlet, have proper outlet installed by a quali
fi
ed electrician. Improper
connection can result in a risk of an electric shock.
• Recommended minimum AWG size for extension cords for battery chargers:
AC INPUT RATING
AMPERES
IF THE INPUT ARTING OF A CHARGER IS GIVEN IN WATTS RATHER THAN IN AMPERES, THE CORRESPONDING AMPERE
RATING IS TO BE DETERMINED BY DIVIDING THE WATTAGE RATING BY THE VOLTAGE RATING — FOR EXAMPLE:
1250 WATTS / 125 VOLTS = 10 AMPERES
AT LEAST
0
2
3
4
5
6
8
10
12
14
16
18
2
3
4
5
6
8
10
12
14
16
18
20
18
18
18
18
18
18
18
16
16
16
14
14
18
18
18
18
16
16
14
14
12
12
12
12
18
16
16
14
14
12
12
10
10
10
8
8
16
14
14
12
12
10
10
8
8
8
8
6
BUT LESS
THAN
25
(7.6)
50
(15.2)
100
(30.5)
150
(45.6)
AWG SIZE OF CORD
LENGTH OF CORD, FEET (M)
#19-014
#19-014
15, 10 & 2 AMP FULLY AUTOMATIC
INTELLI-FAST BATTERY CHARGER