5. Ex-data
ATEX Zone 2
Ex-classification:
II 3G Ex ic IIC T5 Gc
Approved for zone 2, device group II, explosion group IIC (explosive gases, vapours or mist),
temperature class T5.
NEC
Ex-classification: Class I, Division 2, Group A-D T5
4007563
Approved for Class I, Division 2.
6. Technical specifications
Display
7.9“ display (20.1 cm diagonal), 1024 x 768
pixels (manufacturer‘s specifications for the original device)
Dimensions (incl. nylon case)
215 x 152 x 10 mm
Weight (incl. nylon case)
approx. 725 g
Protection class
IP67 (for 30 minutes, 1 metre under water)
Power supply
Integrated rechargeable lithium polymer battery with a
capacity of 23.4 watt hours (manufacturer‘s specifications for
the original device)
CE designation
0
Further technical specifications can be obtained from the manufacturer of the original device.
7. Repairs
Repairs should only be carried out by ecom instruments GmbH, or by specialist companies and
service centres authorised to do so by ecom instruments GmbH, as the safety of the device needs
to be checked after the repair.
In case of repair a fixed display foil will be removed, disposed of and will not be replaced.
The repair request form can be downloaded under the Service section at www.ecom-ex.com.
Exception:
If the original device needs to be repaired by Apple Inc., remove the casing and send the device to
the original manufacturer. If you intend to use the device again in an ATEX Zone 2 area, send the
device and the protective housing, together with the nylon case, to ecom instruments GmbH so
that unrestricted use can be ensured for the respective area.
