SALZBURG
Data for chimney properties calculation (at nominal heating capacity):
Fuel
Wood logs
Lignite briquettes
Flue gas flow
[gs
-1
]
7,1
7,1
Average temperature of flue after draught shaft
[°C]
226
251
Min. draught at nominal heating capacity
[Pa]
12
12
16. Baking
Do not put aluminium paper, pots and pans on the bottom of the oven to prevent enamel from deteriorating due to heat accumulation.
Fruit juice dropping from pans may leave irremovable spots on the enamel. The oven must be pre-heated. Pans with meals that need
more space in height should be put on a grille on the bottom of the oven or slid in one of the lower tracks. Pans with flat meals should
be slid in the bottom track. Do not use pans made of tinned (white) metal if possible.
Light fire should be kept to maintain a temperature of 180-200 ºC. Adjust the air sliders and add small quantities of fuel.
The same instructions like those for cooking apply here except the firing flap valve which must remain shut (position 0). If needed
temperature is impossible to be achieved with open slider then chimney draught is insufficient.
Flue way in the heater needs to be cleaned. Also, make sure that all equipment connected to the same chimney is closed. If high
temperature is still difficult to be obtained, ask your chimney-sweep.
Fuel
Wood logs
(25 cm length, 30 cm circumference)
Lignite briquettes
Primary air slider
50% open
fully open
Secondary air slider
fully open
fully open
If you don´t baking the oven´s door must to be opened!
Guarantee
Shall any failure, malfunction, or surface defect occur on your heater within the guarantee period do never repair it by yourself. After-
sale service can be done only by the manufacturer or distributor.
We guarantee the quality, function, and construction of the cooker for 2 years from the day of purchase: defects definitely occurred as a
consequence of manufacturing defect will be remedied within short time at our cost under the condition that the heater
- has been operated in conformity with operating instruction,
- has been connected to the chimney in conformity with applicable standards,
- has not been damaged mechanically by force,
- has not been subject to modifications, repairs and incompetent handling.
When making a complaint give your exact address and circumstances when the dysfunction occurred. We will deal with the complaint
if you deliver the warranty certificate with the date of purchase and the sales point stamp along with the complaint.
Ask for legible warranty certificate at purchase. Our company will decide on method and place of reparation to be carried out.
Upon purchase, check for integrity of the firing door glass. This is under guarantee for 15 days after the purchase.
It is unacceptable to operate the appliance at extreme conditions, which means:
-
fuel quantity exceeds the recommended quantity,
-
air supply exceeds the recommended quantity,
-
unacceptable fuel types are used.
Heat overcharge shows in the following ways:
-
fireplace ceiling deflection,
-
firing door damage
-
grille has burnt over,
-
refractory-bricks have cracked,
-
change of colour tone of the heater surface
The complaint will not be accepted by the manufacturer if the appliance has not been operated correctly!
Exchange of the product or making the purchase contract void is subject to applicable dispositions of the Civil Code and the
Complaints Order.
