THORLABS vytran LDC450B, User Manual

Page: 52 / 58

LDC450B Large Diameter Cleaver Chapter 10: Specifications
Page 48 TTN197399-D02
Chapter 10
Specifications
LDC450B
Cleave Type Flat Cleave
Accepted Fiber Sizes
Cladding: Ø200 µm to Ø800
μm
Buffer: Ø250 µm to Ø3.2 mm
Accepted Fiber Types
SM, PM, MM, Specialty Fibers Including
Photonic Crystal Fiber (PCF) and Non-Circular Fiber,
Capillary Tubes
Cleave Method Tension and Scribe
Cleave Tolerance
±0.5°
for 400 μm or Less Cladding Diameter
±1.0° for Greater Than
400 μm Cladding Diameter
Loading Linear Tension, Stepper Motor Controlled
Tension 63.7 N (14.3 lbs) Max, Programmable
8
Scribe Diamond Blade, Stepper Motor Controlled
V-Groove Inserts Available Separately (see previous chapter)
Power 12.5 VDC, 5 A (Provided by External Power Supply)
External Power Supply 100 - 120 / 200 - 240 VAC, 4.5 / 2.2 A, 47 - 63 Hz
Dimension (L x W x H)
without Holding Blocks 10.63" x 4.64" x 2.91"
(269.9 mm x 117.7 mm x 73.8 mm)
Dimensions (L x W x H)
10.63" x 4.64" x 4.48"
(269.9 mm x 117.7 mm x 113.7 mm)
Weight 5.5 lbs (2.5 kg)
Operating Temperature 15 to 40 °C
Altitude Range 0 to 2000 m Above Sea Level
Operating Humidity 0 to 75% Relative Humidity (Non-Condensing)
Storage Temperature -20 to 60 °C
Storage Humidity 0 to 90% Relative Humidity (Non-Condensing)
Battery Life
5.5 hours with Handset Controller Plugged in, 10 hours with
Handset Controller Unplugged
8
These Cleavers are calibrated using standard weights, so the tension settings are programmed into the Handset Controller in grams. This
maximum tension corresponds to 6.5 kg.